Blog

The design conditions of street lamp control box shall meet

Publish Time: Author: Site Editor Visit: 234

Convenient maintenance and installation: the street lamp control box is installed at the roadside, so it is necessary to ensure that the installation and maintenance will not easily cause the danger of electric shock to maintenance personnel, and at the same time, the trouble of aerial vehicle maintenance, meter reading and other work will be avoided.

 

Large design capacity: the capacity of street lamp control box is designed according to the development needs of power consumption

 

Determination of power supply point: reasonable selection of power supply point is the key to uniform distribution of low-voltage line load of road lighting

 

Light off function at midnight: the control box is equipped with a microcomputer time controller and a programmable controller to support the use of light off function at midnight to save electricity and extend the service life of electrical appliances

 

Leakage protection function: a good way to solve the leakage problem is to install a three-phase four wire leakage protection main switch, select and turn off according to the power capacity, and set a leakage switch for a single lamp to achieve graded protection, so as to ensure the safety of maintenance personnel and equipment.

 

In addition, the street lamp control box shall be designed with high safety and reliability, no matter grounding, installation or maintenance.

Recent News
Recommend Products
Food Paper Bags RFID Seal Cable Seal TWS Wireless Earbuds Sanitary Butterfly Valve Sanitary Ball Valve Insulated Piercing Connector Rigid Box Machine Rigid Box Machine Small Size Ball Valve Bolt Seal Flexible Copper Braided Wires 1PC BALL VALVE Sanitary Centrifugal Pump Acetate Optical Frames Sanitary Butterfly Valve 卫生离心泵 卫生离心泵 Anti Corrosion Pipe Supports Straw Paper Machine