Against the backdrop of rural revitalization, the renovation of old rural power lines has become an important measure to improve rural energy efficiency and enhance the quality of life for villagers. Among them, the upgrading and renovation of lighting split meter ready boards is particularly crucial, as the energy efficiency can be improved by 50% after the upgrade, injecting new impetus into rural development.

In the past, rural lighting split meter ready boards often had problems such as equipment aging and unreasonable layout, resulting in high energy loss and unstable power supply. The aging of the circuit increases the resistance, generating a large amount of heat when current passes through, resulting in energy waste. At the same time, old split meter ready boards lack intelligent control functions and cannot allocate electricity reasonably according to actual electricity demand, further reducing energy efficiency.

The upgraded lighting split meter ready board adopts advanced technology and high-quality materials. On the one hand, new types of switches, leakage protectors, and other equipment have been replaced, improving the safety and stability of electricity use. These devices have lower resistance and higher conductivity, reducing the loss of electrical energy during transmission. On the other hand, an intelligent control system has been introduced, which can monitor parameters such as current, voltage, and power in real time and automatically adjust them according to actual electricity consumption. For example, during periods of low electricity consumption, the intelligent system will automatically reduce the output power of the split meter ready board to avoid unnecessary energy waste; During peak electricity consumption periods, it is possible to allocate electricity reasonably to ensure the normal operation of all electrical equipment.

In addition, the upgraded lighting split meter ready board has optimized the circuit layout, reduced the detours and crossings of the circuit, and lowered the circuit losses. At the same time, the insulation management of the split meter ready board has been strengthened, improving the overall operational safety.

The energy efficiency of old rural power lines has been significantly improved through the upgrading and renovation of lighting split meter ready boards. This not only reduces the electricity costs for villagers, but also reduces energy waste, which is in line with the concept of green development. In the future, we should continue to increase investment in the renovation of old rural power lines and promote the continuous improvement of rural energy utilization efficiency.