Blog

How to prevent insects and mosquitoes from entering the interior of rural lighting electrical ready boards in Africa?

Publish Time: Author: Site Editor Visit: 4

Mosquito and insect invasion prevention plan for rural lighting electrical ready boards in Africa

In rural Africa, there are numerous mosquitoes, termites, and reptiles in the wild, with large temperature differences between day and night and frequent dust and condensation. To prevent mosquitoes and insects in electrical Ready Board Box, ventilation, heat dissipation, and sealing protection should be taken into account, and they cannot be completely enclosed to avoid internal overheating and tripping.

Cold rolled steel plates are preferred for the box body, and the welding seams are fully welded. The splicing seams are sealed with weather resistant silicone sealant to prevent the seams from becoming a passage for insects and ants. The box door is equipped with a continuous rubber foam sealing strip, which is tightly pressed around the entire circle after closing the door, with a gap controlled within 0.5mm, preventing mosquitoes and insects from penetrating. The cable entry and exit holes are the main entry points for mosquitoes and insects. After the cable is threaded, fireproof mud, cable sealing gaskets or gland heads should be used for sealing. The abandoned holes should be sealed with solid plugs without leaving any voids.

Ventilation and heat dissipation vents are key protection points. Do not directly open the openings, install high-density stainless steel insect proof nets with mesh size ≤ 1.2mm, which can block mosquitoes, termites, and small insects while ensuring air circulation; The insect proof net is made of 304 material, which is suitable for high temperature, salt spray and humid environments, and is not easily corroded or damaged. A drainage hole is reserved at the bottom of the box, and a small insect proof mesh cover is also installed on the drainage hole to prevent crawling from entering from the bottom, and to discharge condensation water inside the box.

Supporting operation and maintenance details: Spray anti ant and insect primer on the outer surface of the box, with an installation height of not less than 1.2 meters above the ground, away from weeds and shrubs, and reduce the habitat of mosquitoes and insects. Regularly inspect the sealing strips and insect screens for damage and aging, and replace them in a timely manner. The entire solution is suitable for local simple operation and maintenance conditions, with a simple structure and easy access to accessories. Without increasing complex costs, it reduces short circuits, leakage, and terminal corrosion caused by mosquitoes and ensures stable operation of rural lighting.

How to prevent insects and mosquitoes from entering the interior of rural lighting electrical ready boards in Africa?

Recent News
Recommend Products