We are all familiar with Ready Board with Bulkhead Lights. Those installed outdoors should be made into waterproof Ready Board with Bulkhead Lights. Because the Ready Board with Bulkhead Light will get wet in the rainy season, this kind of Ready Board with Bulkhead Light is also called waterproof Ready Board with Bulkhead Light, or outdoor rain proof Ready Board with Bulkhead Light, etc. What are the characteristics of this Ready Board with Bulkhead Light? The waterproof Ready Board with Bulkhead Light is well sealed, which is both waterproof and dust-proof, and also acid and alkali resistant, with a very high protection level. The waterproof Ready Board with Bulkhead Light is made of high-quality PC material and fully insulated.
The shell of the waterproof Ready Board with Bulkhead Light is made of high-quality PC material and pressed through a mold. The home mounted rainproof cap (a structure similar to the hat specially developed for rainproof) is very beautiful, antistatic, corrosion-resistant and durable. The degree of protection is also very high. All exposed fasteners are made of stainless steel, and the seals are made of silicone rubber. This product is mainly used in circuits with AC 50Hz, voltage up to 380V and below, DC 440 and below, and current within 100A, as lighting control, electric energy transmission, power control, etc. at the work site. Built in high breaking miniature circuit breaker. It can be equipped with leakage protection, photoelectric control and other functions, and the manufacturer of electrical components can also be determined according to the needs of customers.
Some customers may know that the waterproof Ready Board with Bulkhead Light must reach a high degree of protection, so the sealing accounts for a large part of the high protection. The waterproof Ready Board with Bulkhead Light is mainly sealed with sealing rings. Before, many customers said that they didn't know what kind of sealing ring to choose, what material to use, and so on. In fact, this requires the technical engineer of the Ready Board with Bulkhead Light manufacturer to give advice according to the site situation, The material of the sealing ring determines the degree of protection of the electrical sealing box. When selecting the sealing ring, it is necessary to compare the elasticity of each material component, the impact of contacting with many chemicals, and the impact of cold and hot conditions. The most important thing is that the best effect can be obtained when the waterproof Ready Board with Bulkhead Light and sealing ring have common resistance to the same chemical substance