Precautions for wiring of stainless steel IP65 waterproof distribution box

1. Horizontal and vertical, but no 90 ° bending is allowed;

2. The outgoing line shall not cross with the incoming line, and the wiring can be conducted from the back of the circuit breaker. If the back space is not enough, one pole (18mm) distance can be reserved between the main switch and a branch circuit breaker for wiring, and a cover plate shall be covered at this position afterwards;

3.For the number of branch circuit breakers, lead out several wires from the main switch. If there are too many lines, press the line nose here, wrap the heat shrinkable sleeve, and then connect to the lower port of the main switch.