A split meter ready board is a device used to distribute electrical energy, and its safety requirements are as follows:
Fireproof performance: The split meter ready board should have certain fireproof performance to avoid fire caused by overload, short circuit and other reasons. The box body should be made of fireproof material and adopt flame retardant design.
Insulation performance: The split meter ready board should have good insulation performance to ensure personal safety and normal operation of equipment. The box body and wires should be made of insulating materials, and there should be a good grounding device in the box.
Electromagnetic Compatibility: The split meter ready board should have certain electromagnetic compatibility to avoid interference with surrounding electronic equipment. The box body and wires should have good shielding measures to avoid electromagnetic wave interference.
Installation location: The split meter ready board should be placed in a dry, ventilated place that is not easy to be affected by moisture and corrosion, and avoid being affected by external forces. At the same time, sufficient operating space should be ensured to facilitate inspection and maintenance.
Overload protection: The split meter ready board should have an overload protection function. When the load current exceeds the rated current, the power supply can be cut off in time to protect equipment and personal safety.
Sign identification: The split meter ready board should mark the voltage, current and other parameters on the external obvious position, and set up warning signs to remind users to pay attention to safety.